Our CRESCENT edges laminate countertop trim is a custom-made traditional crescent-style edge. A soft curve similar in shape to a “bullnose” granite edge. Our versatile crescent-shaped edge blends into any kitchen design. We can manufacture our CRESCENT edge using any laminate; Wilsonart, Formica, Pionite, or Nevamar
CRESCENT Edges Laminate Countertop Trim Components
The substrate (backside or base) we use to manufacture our custom CRESCENT edges laminate countertop trim is MR-50 rated moisture resistant medium density fiberboard (MDF). For our CRESCENT edges, HPL (High-Pressure Laminate a.k.a. the laminate) is glued and pressed to the substrate using high strength glue. Both ends of every piece are finished with a 90-degree cut.
All materials used in manufacturing Loti Corp edges are either no or low VOC and all of the surface and seam materials are considered waterproof.
Sizing and Profiles
Our CRESCENT edges laminate countertop trim is manufactured in pieces that are 144″ long by 7/16″ thick by 1-9/16″ high. They have a soft curve face similar in shape to a “bullnose” granite countertop edge and come with a flat back (FB) mounting surface style.
For shipping, our CRESCENT edges are cut to 94 3/4″ and 49 1/4″.
CRESCENT Edges Installation
Our CRESCENT edges laminate countertop trim can be installed by anyone with decent carpentry skills and tools. The tools and skills needed to install our CRESCENT laminate countertop edges are common for carpenters and countertop fabricators.
A miter saw and optionally a disk sander are needed to cut to length and miter the corners. Our CRESCENT edges are composed of MDF and laminate, so no special blades are needed for cutting.
Masking tape and good waterproof wood glue, such as Titebond® III, are all that is needed for attaching our CRESCENT laminate edges to the countertop’s substrate. A damp rag is recommended for cleaning up squeeze out glue.
Finally, a good wax surface treatment is recommended if you wish to really make it shine. We recommend PROTECTALL™ Shine Plus. It’s great for the laminate countertop as well.
Loti Corp warrants to the original owner of our CRESCENT laminate countertop edges, installed by a professional and in a professional manner, that at its option will replace our product if it fails due to any manufacturing defect during the first 10 years after initial installation, except for damage caused by excessive heat, physical or chemical abuse, or acts of nature.
The warranty is non-transferable and applies only to our laminate countertop edges (1) installed by a professional, (2) purchased for use in the United States and it’s territories, Canada or Mexico, (3) which has not been moved from it’s original place of installation, (4) which fails solely due to manufacturing defect.
Loti Corp can not be held liable for the failure of any glue lines not produced at the time of manufacture. Warranty extends only to replacement of our Bevel edges and backsplashes and does not extend to any labor and/or materials necessary for re-installation of the product. Furthermore, Loti Corp shall not be held liable for any loss, direct, consequential, or incidental damages arising out of the use of our Bevel edges and backsplashes or any other products manufactured, distributed, or recommended by Loti Corp.